[Isis-users] errors

[Roger Guilherme]

Hola, Aldo.

Me he dado cuenta de que no has recibido respuesta aquí, así que te copio
la respuesta que te envié en el foro:
No puedes averiguar lo que ocurre en tu ordenador sólo enviando un archivo
vhost. Un entorno de servidor tiene una serie de variables y la solución de
problemas requiere leer e interpretar el mensaje de error.
Si tu problema es la configuración de tu servidor local, te sugiero que
vayas al foro de desarrolladores de servidores:
https://community.apachefriends.org/f/
ABCD, como WordPress y otros, es sólo una aplicación que se ejecuta en el
servidor y puede funcionar en otros tipos de servidores, pero es necesario
estar familiarizado con este tipo de servicio.

¡Saludos desde Brasil!

Roger




Em qui., 8 de fev. de 2024 às 03:49, Aldo Levi <aldoeri88888888 at gmail.com>
escreveu:

> dado que no me responden en el foro de ABCD sobre mis problemas los
> expondre aqui las negritas implican o archivos  o el local host
>
> Up
> 0
> Down
> Not Helpful
>
> *este es el httpd.conf*
>
> #
> # This is the main Apache HTTP server configuration file. It contains the
> # configuration directives that give the server its instructions.
> # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
> # In particular, see
> # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
> # for a discussion of each configuration directive.
> #
> # Do NOT simply read the instructions in here without understanding
> # what they do. They’re here only as hints or reminders. If you are unsure
> # consult the online docs. You have been warned.
> #
> # Configuration and logfile names: If the filenames you specify for many
> # of the server’s control files begin with “/” (or “drive:/” for Win32),
> the
> # server will use that explicit path. If the filenames do *not* begin
> # with “/”, the value of ServerRoot is prepended — so “logs/access_log”
> # with ServerRoot set to “/usr/local/apache2” will be interpreted by the
> # server as “/usr/local/apache2/logs/access_log”, whereas
> “/logs/access_log”
> # will be interpreted as ‘/logs/access_log’.
> #
> # NOTE: Where filenames are specified, you must use forward slashes
> # instead of backslashes (e.g., “c:/apache” instead of “c:\apache”).
> # If a drive letter is omitted, the drive on which httpd.exe is located
> # will be used by default. It is recommended that you always supply
> # an explicit drive letter in absolute paths to avoid confusion.
>
> #
> # ServerRoot: The top of the directory tree under which the server’s
> # configuration, error, and log files are kept.
> #
> # Do not add a slash at the end of the directory path. If you point
> # ServerRoot at a non-local disk, be sure to specify a local disk on the
> # Mutex directive, if file-based mutexes are used. If you wish to share the
> # same ServerRoot for multiple httpd daemons, you will need to change at
> # least PidFile.
> #
> Define SRVROOT “C:/abcd/apache”
>
> ServerRoot “C:/abcd/apache”
>
> #
> # Mutex: Allows you to set the mutex mechanism and mutex file directory
> # for individual mutexes, or change the global defaults
> #
> # Uncomment and change the directory if mutexes are file-based and the
> default
> # mutex file directory is not on a local disk or is not appropriate for
> some
> # other reason.
> #
> # Mutex default:logs
>
> #
> # Listen: Allows you to bind Apache to specific IP addresses and/or
> # ports, instead of the default. See also the <VirtualHost>
> # directive.
> #
> # Change this to Listen on specific IP addresses as shown below to
> # prevent Apache from glomming onto all bound IP addresses.
> #
> #Listen 12.34.56.78:9090
> Listen 9090
>
> #
> # Dynamic Shared Object (DSO) Support
> #
> # To be able to use the functionality of a module which was built as a DSO
> you
> # have to place corresponding `LoadModule’ lines at this location so the
> # directives contained in it are actually available _before_ they are used.
> # Statically compiled modules (those listed by `httpd -l’) do not need
> # to be loaded here.
> #
> # Example:
> # LoadModule foo_module modules/mod_foo.so
> #
> LoadModule access_compat_module modules/mod_access_compat.so
> LoadModule actions_module modules/mod_actions.so
> LoadModule alias_module modules/mod_alias.so
> LoadModule allowmethods_module modules/mod_allowmethods.so
> LoadModule asis_module modules/mod_asis.so
> LoadModule auth_basic_module modules/mod_auth_basic.so
> #LoadModule auth_digest_module modules/mod_auth_digest.so
> #LoadModule auth_form_module modules/mod_auth_form.so
> #LoadModule authn_anon_module modules/mod_authn_anon.so
> LoadModule authn_core_module modules/mod_authn_core.so
> #LoadModule authn_dbd_module modules/mod_authn_dbd.so
> #LoadModule authn_dbm_module modules/mod_authn_dbm.so
> LoadModule authn_file_module modules/mod_authn_file.so
> #LoadModule authn_socache_module modules/mod_authn_socache.so
> #LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
> #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
> LoadModule authz_core_module modules/mod_authz_core.so
> #LoadModule authz_dbd_module modules/mod_authz_dbd.so
> #LoadModule authz_dbm_module modules/mod_authz_dbm.so
> LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
> LoadModule authz_host_module modules/mod_authz_host.so
> #LoadModule authz_owner_module modules/mod_authz_owner.so
> LoadModule authz_user_module modules/mod_authz_user.so
> LoadModule autoindex_module modules/mod_autoindex.so
> #LoadModule brotli_module modules/mod_brotli.so
> #LoadModule buffer_module modules/mod_buffer.so
> #LoadModule cache_module modules/mod_cache.so
> #LoadModule cache_disk_module modules/mod_cache_disk.so
> #LoadModule cache_socache_module modules/mod_cache_socache.so
> #LoadModule cern_meta_module modules/mod_cern_meta.so
> LoadModule cgi_module modules/mod_cgi.so
> #LoadModule charset_lite_module modules/mod_charset_lite.so
> #LoadModule data_module modules/mod_data.so
> #LoadModule dav_module modules/mod_dav.so
> #LoadModule dav_fs_module modules/mod_dav_fs.so
> LoadModule dav_lock_module modules/mod_dav_lock.so
> #LoadModule dbd_module modules/mod_dbd.so
> #LoadModule deflate_module modules/mod_deflate.so
> LoadModule dir_module modules/mod_dir.so
> #LoadModule dumpio_module modules/mod_dumpio.so
> LoadModule env_module modules/mod_env.so
> #LoadModule expires_module modules/mod_expires.so
> #LoadModule ext_filter_module modules/mod_ext_filter.so
> #LoadModule file_cache_module modules/mod_file_cache.so
> #LoadModule filter_module modules/mod_filter.so
> #LoadModule http2_module modules/mod_http2.so
> LoadModule headers_module modules/mod_headers.so
> #LoadModule heartbeat_module modules/mod_heartbeat.so
> #LoadModule heartmonitor_module modules/mod_heartmonitor.so
> #LoadModule ident_module modules/mod_ident.so
> #LoadModule imagemap_module modules/mod_imagemap.so
> LoadModule include_module modules/mod_include.so
> LoadModule info_module modules/mod_info.so
> LoadModule isapi_module modules/mod_isapi.so
> #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
> #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
> #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
> #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
> #LoadModule ldap_module modules/mod_ldap.so
> #LoadModule logio_module modules/mod_logio.so
> LoadModule log_config_module modules/mod_log_config.so
> #LoadModule log_debug_module modules/mod_log_debug.so
> #LoadModule log_forensic_module modules/mod_log_forensic.so
> #LoadModule lua_module modules/mod_lua.so
> LoadModule cache_disk_module modules/mod_cache_disk.so
> #LoadModule macro_module modules/mod_macro.so
> #LoadModule md_module modules/mod_md.so
> LoadModule mime_module modules/mod_mime.so
> #LoadModule mime_magic_module modules/mod_mime_magic.so
> LoadModule negotiation_module modules/mod_negotiation.so
> LoadModule proxy_module modules/mod_proxy.so
> LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
> #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
> #LoadModule proxy_connect_module modules/mod_proxy_connect.so
> #LoadModule proxy_express_module modules/mod_proxy_express.so
> #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
> #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
> #LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so
> #LoadModule proxy_html_module modules/mod_proxy_html.so
> #LoadModule proxy_http_module modules/mod_proxy_http.so
> #LoadModule proxy_http2_module modules/mod_proxy_http2.so
> #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
> #LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so
> #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
> #LoadModule ratelimit_module modules/mod_ratelimit.so
> #LoadModule reflector_module modules/mod_reflector.so
> #LoadModule remoteip_module modules/mod_remoteip.so
> #LoadModule request_module modules/mod_request.so
> #LoadModule reqtimeout_module modules/mod_reqtimeout.so
> LoadModule rewrite_module modules/mod_rewrite.so
> #LoadModule sed_module modules/mod_sed.so
> #LoadModule session_module modules/mod_session.so
> #LoadModule session_cookie_module modules/mod_session_cookie.so
> #LoadModule session_crypto_module modules/mod_session_crypto.so
> #LoadModule session_dbd_module modules/mod_session_dbd.so
> LoadModule setenvif_module modules/mod_setenvif.so
> #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
> #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
> #LoadModule socache_dbm_module modules/mod_socache_dbm.so
> #LoadModule socache_memcache_module modules/mod_socache_memcache.so
> #LoadModule socache_redis_module modules/mod_socache_redis.so
> LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
> #LoadModule speling_module modules/mod_speling.so
> LoadModule ssl_module modules/mod_ssl.so
> LoadModule status_module modules/mod_status.so
> #LoadModule substitute_module modules/mod_substitute.so
> #LoadModule unique_id_module modules/mod_unique_id.so
> #LoadModule userdir_module modules/mod_userdir.so
> #LoadModule usertrack_module modules/mod_usertrack.so
> LoadModule version_module modules/mod_version.so
> #LoadModule vhost_alias_module modules/mod_vhost_alias.so
> #LoadModule watchdog_module modules/mod_watchdog.so
> #LoadModule xml2enc_module modules/mod_xml2enc.so
>
> <IfModule unixd_module>
> #
> # If you wish httpd to run as a different user or group, you must run
> # httpd as root initially and it will switch.
> #
> # User/Group: The name (or #number) of the user/group to run httpd as.
> # It is usually good practice to create a dedicated user and group for
> # running httpd, as with most system services.
> #
> User daemon
> Group daemon
>
> </IfModule>
>
> # ‘Main’ server configuration
> #
> # The directives in this section set up the values used by the ‘main’
> # server, which responds to any requests that aren’t handled by a
> # <VirtualHost> definition. These values also provide defaults for
> # any <VirtualHost> containers you may define later in the file.
> #
> # All of these directives may appear inside <VirtualHost> containers,
> # in which case these default settings will be overridden for the
> # virtual host being defined.
> #
>
> #
> # ServerAdmin: Your address, where problems with the server should be
> # e-mailed. This address appears on some server-generated pages, such
> # as error documents. e.g. admin at your-domain.com
> #
> ServerAdmin postmaster at localhost
>
> #
> # ServerName gives the name and port that the server uses to identify
> itself.
> # This can often be determined automatically, but we recommend you specify
> # it explicitly to prevent problems during startup.
> #
> # If your host doesn’t have a registered DNS name, enter its IP address
> here.
> #
> ServerName localhost:9090
>
> #
> # Deny access to the entirety of your server’s filesystem. You must
> # explicitly permit access to web content directories in other
> # <Directory> blocks below.
> #
> <Directory />
> AllowOverride none
> Require all denied
> </Directory>
>
> #
> # Note that from this point forward you must specifically allow
> # particular features to be enabled – so if something’s not working as
> # you might expect, make sure that you have specifically enabled it
> # below.
> #
>
> #
> # DocumentRoot: The directory out of which you will serve your
> # documents. By default, all requests are taken from this directory, but
> # symbolic links and aliases may be used to point to other locations.
> #
> DocumentRoot “C:/xampp/htdocs”
> <Directory “C:/xampp/htdocs”>
> #
> # Possible values for the Options directive are “None”, “All”,
> # or any combination of:
> # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
> #
> # Note that “MultiViews” must be named *explicitly* — “Options All”
> # doesn’t give it to you.
> #
> # The Options directive is both complicated and important. Please see
> # http://httpd.apache.org/docs/2.4/mod/core.html#options
> # for more information.
> #
> Options Indexes FollowSymLinks Includes ExecCGI
>
> #
> # AllowOverride controls what directives may be placed in .htaccess files.
> # It can be “All”, “None”, or any combination of the keywords:
> # AllowOverride FileInfo AuthConfig Limit
> #
> AllowOverride All
>
> #
> # Controls who can get stuff from this server.
> #
> Require all granted
> </Directory>
>
> #
> # DirectoryIndex: sets the file that Apache will serve if a directory
> # is requested.
> #
> <IfModule dir_module>
> DirectoryIndex index.php index.pl index.cgi index.asp index.shtml
> index.html index.htm \
> default.php default.pl default.cgi default.asp default.shtml default.html
> default.htm \
> home.php home.pl home.cgi home.asp home.shtml home.html home.htm
> </IfModule>
>
> #
> # The following lines prevent .htaccess and .htpasswd files from being
> # viewed by Web clients.
> #
> <Files “.ht*”>
> Require all denied
> </Files>
>
> #
> # ErrorLog: The location of the error log file.
> # If you do not specify an ErrorLog directive within a <VirtualHost>
> # container, error messages relating to that virtual host will be
> # logged here. If you *do* define an error logfile for a <VirtualHost>
> # container, that host’s errors will be logged there and not here.
> #
> ErrorLog “logs/error.log”
>
> #
> # LogLevel: Control the number of messages logged to the error_log.
> # Possible values include: debug, info, notice, warn, error, crit,
> # alert, emerg.
> #
> LogLevel warn
>
> <IfModule log_config_module>
> #
> # The following directives define some format nicknames for use with
> # a CustomLog directive (see below).
> #
> LogFormat “%h %l %u %t \”%r\” %>s %b \”%{Referer}i\” \”%{User-Agent}i\””
> combined
> LogFormat “%h %l %u %t \”%r\” %>s %b” common
>
> <IfModule logio_module>
> # You need to enable mod_logio.c to use %I and %O
> LogFormat “%h %l %u %t \”%r\” %>s %b \”%{Referer}i\” \”%{User-Agent}i\” %I
> %O” combinedio
> </IfModule>
>
> #
> # The location and format of the access logfile (Common Logfile Format).
> # If you do not define any access logfiles within a <VirtualHost>
> # container, they will be logged here. Contrariwise, if you *do*
> # define per-<VirtualHost> access logfiles, transactions will be
> # logged therein and *not* in this file.
> #
> #CustomLog “logs/access.log” common
>
> #
> # If you prefer a logfile with access, agent, and referer information
> # (Combined Logfile Format) you can use the following directive.
> #
> CustomLog “logs/access.log” combined
> </IfModule>
>
> <IfModule alias_module>
> #
> # Redirect: Allows you to tell clients about documents that used to
> # exist in your server’s namespace, but do not anymore. The client
> # will make a new request for the document at its new location.
> # Example:
> # Redirect permanent /foo http://www.example.com/bar
>
> #
> # Alias: Maps web paths into filesystem paths and is used to
> # access content that does not live under the DocumentRoot.
> # Example:
> # Alias /webpath /full/filesystem/path
> #
> # If you include a trailing / on /webpath then the server will
> # require it to be present in the URL. You will also likely
> # need to provide a <Directory> section to allow access to
> # the filesystem path.
>
> #
> # ScriptAlias: This controls which directories contain server scripts.
> # ScriptAliases are essentially the same as Aliases, except that
> # documents in the target directory are treated as applications and
> # run by the server when requested rather than as documents sent to the
> # client. The same rules about trailing “/” apply to ScriptAlias
> # directives as to Alias.
> #
> ScriptAlias /cgi-bin/ “C:/xampp/cgi-bin/”
>
> </IfModule>
>
> <IfModule cgid_module>
> #
> # ScriptSock: On threaded servers, designate the path to the UNIX
> # socket used to communicate with the CGI daemon of mod_cgid.
> #
> #Scriptsock cgisock
> </IfModule>
>
> #
> # “C:/xampp/cgi-bin” should be changed to whatever your ScriptAliased
> # CGI directory exists, if you have that configured.
> #
> <Directory “C:/xampp/cgi-bin”>
> AllowOverride All
> Options None
> Require all granted
> </Directory>
>
> <IfModule headers_module>
> #
> # Avoid passing HTTP_PROXY environment to CGI’s on this or any proxied
> # backend servers which have lingering “httpoxy” defects.
> # ‘Proxy’ request header is undefined by the IETF, not listed by IANA
> #
> RequestHeader unset Proxy early
> </IfModule>
>
> <IfModule mime_module>
> #
> # TypesConfig points to the file containing the list of mappings from
> # filename extension to MIME-type.
> #
> TypesConfig conf/mime.types
>
> #
> # AddType allows you to add to or override the MIME configuration
> # file specified in TypesConfig for specific file types.
> #
> #AddType application/x-gzip .tgz
> #
> # AddEncoding allows you to have certain browsers uncompress
> # information on the fly. Note: Not all browsers support this.
> #
> #AddEncoding x-compress .Z
> #AddEncoding x-gzip .gz .tgz
> #
> # If the AddEncoding directives above are commented-out, then you
> # probably should define those extensions to indicate media types:
> #
> AddType application/x-compress .Z
> AddType application/x-gzip .gz .tgz
>
> #
> # AddHandler allows you to map certain file extensions to “handlers”:
> # actions unrelated to filetype. These can be either built into the server
> # or added with the Action directive (see below)
> #
> # To use CGI scripts outside of ScriptAliased directories:
> # (You will also need to add “ExecCGI” to the “Options” directive.)
> #
> AddHandler cgi-script .cgi .pl .asp
>
> # For type maps (negotiated resources):
> #AddHandler type-map var
>
> #
> # Filters allow you to process content before it is sent to the client.
> #
> # To parse .shtml files for server-side includes (SSI):
> # (You will also need to add “Includes” to the “Options” directive.)
> #
> AddType text/html .shtml
> AddOutputFilter INCLUDES .shtml
> </IfModule>
>
> #
> # The mod_mime_magic module allows the server to use various hints from the
> # contents of the file itself to determine its type. The MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> #
> <IfModule mime_magic_module>
> #
> # The mod_mime_magic module allows the server to use various hints from the
> # contents of the file itself to determine its type. The MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> #
> MIMEMagicFile “conf/magic”
> </IfModule>
>
> #
> # Customizable error responses come in three flavors:
> # 1) plain text 2) local redirects 3) external redirects
> #
> # Some examples:
> #ErrorDocument 500 “The server made a boo boo.”
> #ErrorDocument 404 /missing.html
> #ErrorDocument 404 “/cgi-bin/missing_handler.pl”
> #ErrorDocument 402 http://www.example.com/subscription_info.html
> #
>
> #
> # MaxRanges: Maximum number of Ranges in a request before
> # returning the entire resource, or one of the special
> # values ‘default’, ‘none’ or ‘unlimited’.
> # Default setting is to accept 200 Ranges.
> #MaxRanges unlimited
>
> #
> # EnableMMAP and EnableSendfile: On systems that support it,
> # memory-mapping or the sendfile syscall may be used to deliver
> # files. This usually improves server performance, but must
> # be turned off when serving from networked-mounted
> # filesystems or if support for these functions is otherwise
> # broken on your system.
> # Defaults: EnableMMAP On, EnableSendfile Off
> #
> #EnableMMAP off
> #EnableSendfile off
>
> # Supplemental configuration
> #
> # The configuration files in the conf/extra/ directory can be
> # included to add extra features or to modify the default configuration of
> # the server, or you may simply copy their contents here and change as
> # necessary.
>
> # Server-pool management (MPM specific)
> Include conf/extra/httpd-mpm.conf
>
> # Multi-language error messages
> #Include conf/extra/httpd-multilang-errordoc.conf
>
> # Fancy directory listings
> Include conf/extra/httpd-autoindex.conf
>
> # Language settings
> Include conf/extra/httpd-languages.conf
>
> # User home directories
> Include conf/extra/httpd-userdir.conf
>
> # Real-time info on requests and configuration
> Include conf/extra/httpd-info.conf
>
> # Virtual hosts
> Include conf/extra/httpd-vhosts.conf
> Include conf/extra/vhost_ABCD_9090_Windows.conf
>
> # Local access to the Apache HTTP Server Manual
> #Include conf/extra/httpd-manual.conf
>
> # Distributed authoring and versioning (WebDAV)
> #Attention! WEB_DAV is a security risk without a new userspecific
> configuration for a secure authentifcation
> #Include conf/extra/httpd-dav.conf
>
> # Various default settings
> #Include conf/extra/httpd-default.conf
> # Implements a proxy/gateway for Apache.
> Include “conf/extra/httpd-proxy.conf”
> # Various default settings
> Include “conf/extra/httpd-default.conf”
> # XAMPP settings
> Include “conf/extra/httpd-xampp.conf”
>
> # Configure mod_proxy_html to understand HTML4/XHTML1
> <IfModule proxy_html_module>
> Include conf/extra/proxy-html.conf
> </IfModule>
>
> # Secure (SSL/TLS) connections
> Include conf/extra/httpd-ssl.conf
> #
> # Note: The following must must be present to support
> # starting without SSL on platforms with no /dev/random equivalent
> # but a statically compiled-in mod_ssl.
> #
> <IfModule ssl_module>
> SSLRandomSeed startup builtin
> SSLRandomSeed connect builtin
> </IfModule>
>
> # XAMPP: We disable operating system specific optimizations for a listening
> # socket by the http protocol here. IE 64 bit make problems without this.
>
> AcceptFilter http none
> AcceptFilter https none
> # AJP13 Proxy
> <IfModule mod_proxy.c>
> <IfModule mod_proxy_ajp.c>
> Include “conf/extra/httpd-ajp.conf”
> </IfModule>
> </IfModule>
>
> y este es el error  que me marca en cmd al usar *abcd_start.bat*
>
> Installing HTTPD – Apache
> [Sat Feb 03 16:07:59.155552 2024] [mpm_winnt:error] [pid 8552:tid 168]
> AH00433: Apache2.4: Service is already installed.
> Calling ABCD Site
>
> creo que la llevo de gane me manda menos errors que el anterior ejecutable
> pero tiene que ver con todas las modificaciones  que le han hecho por cieto
> tampoco funciona el *local host 9090*
>
> *todos lo archivos que contienen C:\XAMP deberian de modificarse como
> sugerencia mas si son de confiuracion *
> _______________________________________________
> isis-users mailing list
> isis-users at iccisis.org
> To manage your own subscription options go to:
> http://lists.iccisis.org/listinfo/isis-users
> Or contact Henk Rutten: hlrutten at xs4all.nl
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.iccisis.org/pipermail/isis-users/attachments/20240216/eb9f4ea8/attachment.html>