[Isis-users] isis-users Digest, Vol 36, Issue 11
De Smet Egbert
egbert.desmet at uantwerpen.be
Wed Oct 23 13:42:43 CEST 2013
Hello,
if your ABCD-webpage is not opening, you will have to check the following necessary elements to be running fine :
- is Apache running ? It is normally launched by the file ABCD_start.bat with port 9090, avoiding conflicts with possibly another application already running on port 80 (e.g. Skype). If Apache cannot run as a normal 'service' it will try to open in a console (the black CMD window which you can minimize but not close in order to keep Apache running).
If Apache cannot run for some reason (e.g. we found out that Apache 2.4 has a problem with old pre-service pack 3 of Windows XP), please check your services running (in Computer|Manage|Services) and stop or remove the running Apache if any.
- If Apache is running and 'listening' to port 9090 (as set by yourself in the ABCD installation wizard for Windows or set by default in the .ZIP archive) it will look for ABCD to reside in the folder \ABCD\www\htdocs . Please check if the page is not opening if the files are at that exact location indeed. In Windows 8 you, with administrator login, might have to create a folder 'ABCD' in the root ('\') of your hard-disk manually and giving it full access rights to everybody (with the file-manager : right-click on the folder and to to 'properties' then 'security' tab) BEFORE installing ABCD into that same folder. This way you ensure full access rights are granted.
- If you installed ABCD (using the wizard) in another folder, the correct folder will be defined in httpd.conf of your Apache conf-folder as the 'DocumentRoot' variable. Check that and change if necessary.
When Apache is running correctly and the ABCD-folders are installed into the folder named as 'DocumentRoot' in the Apache configuratoin (default=\ABCD\www\htdocs) then ABCD should open its login page at least.
The ABCD-wizard for installation in Windows (also 8) takes care of all this but if it cannot run Apache (e.g. because it was not allowed to write its configuration files) it won't finish and your configuration has to be corrected manually, or you create a full-access ABCD-folder yourself and re-install ABCD into that folder for the installation process to finish fully, which means also the Apache configuraiton will have been set correctly.
Egbert de Smet
Universiteit Antwerpen
________________________________________
From: isis-users-bounces at iccisis.org [isis-users-bounces at iccisis.org] on behalf of Pawan Kumar Gupta [pawan.jp at gmail.com]
Sent: Wednesday, October 23, 2013 9:17 AM
To: isis-users at iccisis.org
Subject: Re: [Isis-users] isis-users Digest, Vol 36, Issue 11
Friends,
Please help. I have installed ABCD1.2 in WINDOWS 8.. When I start it, I find the message, "Web page not found". Please let me know if I need to change batch file,.
Thanks.
On 18 October 2013 15:30, <isis-users-request at iccisis.org<mailto:isis-users-request at iccisis.org>> wrote:
[Boxbe]<https://www.boxbe.com/overview> [X] This message is eligible for Automatic Cleanup! (isis-users-request at iccisis.org<mailto:isis-users-request at iccisis.org>) Add cleanup rule<https://www.boxbe.com/popup?url=https%3A%2F%2Fwww.boxbe.com%2Fcleanup%3Ftoken%3DcpnCrgEMQgwPfm0LYIHliN64zmx388UIpZVZ8ifqIW2%252BzMPyuc9hQ%252Bwq7xJ9mNjyC%252B5xruNNKHgQuF2ANfUVBWMOJXRq1gzqNoBV%252Faj2i67787xNioZeuLPxRNA0qfFW%252FDf1JJLp%252Bz4Qv4hv8IriaCA2InIZiGfC%26key%3DSd4b0ECQY2wP%252FjVIJPGqkFgN7IYYdqXwTRS2MeBqagA%253D&tc_serial=15438750377&tc_rand=49007912&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001> | More info<http://blog.boxbe.com/general/boxbe-automatic-cleanup?tc_serial=15438750377&tc_rand=49007912&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001>
Send isis-users mailing list submissions to
isis-users at iccisis.org<mailto:isis-users at iccisis.org>
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.iccisis.org/listinfo/isis-users
or, via email, send a message with subject or body 'help' to
isis-users-request at iccisis.org<mailto:isis-users-request at iccisis.org>
You can reach the person managing the list at
isis-users-owner at iccisis.org<mailto:isis-users-owner at iccisis.org>
When replying, please edit your Subject line so it is more specific
than "Re: Contents of isis-users digest..."
Today's Topics:
1. Migration previous version of ABCD to new ABCD version (M?nica)
2. Re: Migration previous version of ABCD to new ABCD version
(De Smet Egbert)
3. Re: ABCD Linux (De Smet Egbert)
4. Re: Migration previous version of ABCD to new ABCD version
(M?nica)
5. FST, subcampos repetibles - ABCD (daniel biset)
6. Re: ABCD Linux (De Smet Egbert)
7. Sobre ABCD / About ABCD (Leandro Tabares Martin)
8. Ayuda (Didier Su?rez R)
----------------------------------------------------------------------
Message: 1
Date: Thu, 17 Oct 2013 09:12:51 -0300
From: M?nica <tnica01 at gmail.com<mailto:tnica01 at gmail.com>>
To: CDS-ISIS list <isis-users at iccisis.org<mailto:isis-users at iccisis.org>>
Subject: [Isis-users] Migration previous version of ABCD to new ABCD
version
Message-ID:
<CAF=jSrck_LRitWASVPfb3tUQv83H=YXRSeQg=ZvUe5WJvAdSgA at mail.gmail.com<mailto:ZvUe5WJvAdSgA at mail.gmail.com>>
Content-Type: text/plain; charset="iso-8859-1"
Queridos colegas,
Existe um documento nos sites (
http://modelo.bvsalud.org/download/abcd/manuais/) ou (
http://isisabcd.pbworks.com/w/browse/#view=ViewAllObjects) com explica??es
de como posso migrar uma base de dados criada em uma vers?o anterior do
ABCD Windows para uma nova vers?o do ABCD corretamente?
Obrigada
Monica.
Dear colleagues,
There is a document on the sites (
http://modelo.bvsalud.org/download/abcd/manuais/) or (
http://isisabcd.pbworks.com/w/browse/ # view = ViewAllObjects) with
explanations of how can I migrate a database created in an previous version
of ABCD for Windows to a new ABCD version correctly?
Thanks
Monica.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.iccisis.org/pipermail/isis-users/attachments/20131017/a1cfbb05/attachment-0001.html>
------------------------------
Message: 2
Date: Thu, 17 Oct 2013 14:23:40 +0000
From: De Smet Egbert <egbert.desmet at uantwerpen.be<mailto:egbert.desmet at uantwerpen.be>>
To: M?nica <tnica01 at gmail.com<mailto:tnica01 at gmail.com>>, CDS-ISIS list <isis-users at iccisis.org<mailto:isis-users at iccisis.org>>
Subject: Re: [Isis-users] Migration previous version of ABCD to new
ABCD version
Message-ID:
<7A31013ECEFE9A47B6A502B4A259260B0156309D66 at xmail31.ad.ua.ac.be<mailto:7A31013ECEFE9A47B6A502B4A259260B0156309D66 at xmail31.ad.ua.ac.be>>
Content-Type: text/plain; charset="iso-8859-1"
Hello,
as far as I know a database of any previous ABCD-version can be used in the version 1.2t (and later 2.0) without any migration necessary. There have not been any changes re the database-structures. So you can simply copy the database-folders (and .par and .DEF files in the par-subfolder) to the new ABCD installation.
There are (quite some) new features in the FDT but the 'old' ones are all still there. The change of some 'field-types' to 'input types' is expected to be done automatically. Please inform us if you have a problem with that.
Egbert de Smet
Universiteit Antwerpen
________________________________________
From: isis-users-bounces at iccisis.org<mailto:isis-users-bounces at iccisis.org> [isis-users-bounces at iccisis.org<mailto:isis-users-bounces at iccisis.org>] on behalf of M?nica [tnica01 at gmail.com<mailto:tnica01 at gmail.com>]
Sent: Thursday, October 17, 2013 2:12 PM
To: CDS-ISIS list
Subject: [Isis-users] Migration previous version of ABCD to new ABCD version
Queridos colegas,
Existe um documento nos sites (http://modelo.bvsalud.org/download/abcd/manuais/) ou (http://isisabcd.pbworks.com/w/browse/#view=ViewAllObjects) com explica??es de como posso migrar uma base de dados criada em uma vers?o anterior do ABCD Windows para uma nova vers?o do ABCD corretamente?
Obrigada
Monica.
Dear colleagues,
There is a document on the sites (http://modelo.bvsalud.org/download/abcd/manuais/) or (http://isisabcd.pbworks.com/w/browse/ # view = ViewAllObjects) with explanations of how can I migrate a database created in an previous version of ABCD for Windows to a new ABCD version correctly?
Thanks
Monica.
------------------------------
Message: 3
Date: Thu, 17 Oct 2013 14:58:06 +0000
From: De Smet Egbert <egbert.desmet at uantwerpen.be<mailto:egbert.desmet at uantwerpen.be>>
To: Heriberto Raul Garcia Alfaro <halfa1702 at gmail.com<mailto:halfa1702 at gmail.com>>,
"isis-users at iccisis.org<mailto:isis-users at iccisis.org>" <isis-users at iccisis.org<mailto:isis-users at iccisis.org>>
Subject: Re: [Isis-users] ABCD Linux
Message-ID:
<7A31013ECEFE9A47B6A502B4A259260B0156309DE2 at xmail31.ad.ua.ac.be<mailto:7A31013ECEFE9A47B6A502B4A259260B0156309DE2 at xmail31.ad.ua.ac.be>>
Content-Type: text/plain; charset="us-ascii"
The procedure to create and migrate a database from Micro CDS/ISIS or WinISIS to ABCD is available in the manual 'ABC of ABCD'. The chapter involved for the new version of the manual is available as a draft at the website 'http://abcd.netcat.be/files' at the lower part.
In essence it means that the existing FDT, FST and PFT can be 'copied' from exisiting databases and the ISO-export of your records can be imported into ABCD. In reality since ABCD is - as you said - 'web isis', many typical DOS or WINDOWS features of the PFT cannot be used and need to be replaced by WWW-equivalents, for which ABCD offers a nice wizard to create such PFT's.
For the FST you would best re-work the FST to use prefixes of 3 characters : 2 + '_' .
Egbert de Smet
Universiteit Antwerpen
________________________________________
From: Heriberto Raul Garcia Alfaro [halfa1702 at gmail.com<mailto:halfa1702 at gmail.com>]
Sent: Thursday, October 17, 2013 4:47 PM
To: De Smet Egbert
Subject: Re: [Isis-users] ABCD Linux
Disculpen quisiera saber si decasualidad tienen algun documento o una referencia o que talvez me explicaran como migrar las bases de datos de micro isis a web isis, cual es el prosedimiento???
De antemano muhcas gracias
--
Heriberto Garcia Alfaro
Ing. Sistemas / responsable de ISIS IHNCA Nicaragua
UCA.
------------------------------
Message: 4
Date: Thu, 17 Oct 2013 12:19:44 -0300
From: M?nica <tnica01 at gmail.com<mailto:tnica01 at gmail.com>>
To: De Smet Egbert <egbert.desmet at uantwerpen.be<mailto:egbert.desmet at uantwerpen.be>>
Cc: CDS-ISIS list <isis-users at iccisis.org<mailto:isis-users at iccisis.org>>
Subject: Re: [Isis-users] Migration previous version of ABCD to new
ABCD version
Message-ID:
<CAF=jSrfUe2a-YMfB1AUDRKQ03ZPbF4ifJ-6ahUfrSQa-s68BGA at mail.gmail.com<mailto:jSrfUe2a-YMfB1AUDRKQ03ZPbF4ifJ-6ahUfrSQa-s68BGA at mail.gmail.com>>
Content-Type: text/plain; charset="iso-8859-1"
Hello Egbert,
There are many details to a database, from a previous version of the ABCD,
work correctly on a new version of ABCD, for example:
Copy the folders:
acces \ data
MyDatabase \
circulation \
copies \ data \
loanobject \ data
par \ MyDataBase.par
trans \ data
users \ data
www \ htdocs \ MyDatabase
Reviewing files as php \ php.ini and apache2.4 \ conf \ httpd.conf.
I would like to know if there is a document which has information in detail
about this process?
Thanks
Monica.
Em quinta-feira, 17 de outubro de 2013, De Smet Egbert escreveu:
> Hello,
>
> as far as I know a database of any previous ABCD-version can be used in
> the version 1.2t (and later 2.0) without any migration necessary. There
> have not been any changes re the database-structures. So you can simply
> copy the database-folders (and .par and .DEF files in the par-subfolder) to
> the new ABCD installation.
> There are (quite some) new features in the FDT but the 'old' ones are all
> still there. The change of some 'field-types' to 'input types' is expected
> to be done automatically. Please inform us if you have a problem with that.
>
> Egbert de Smet
> Universiteit Antwerpen
> ________________________________________
> From: isis-users-bounces at iccisis.org<mailto:isis-users-bounces at iccisis.org> <javascript:;> [
> isis-users-bounces at iccisis.org<mailto:isis-users-bounces at iccisis.org> <javascript:;>] on behalf of M?nica [
> tnica01 at gmail.com<mailto:tnica01 at gmail.com> <javascript:;>]
> Sent: Thursday, October 17, 2013 2:12 PM
> To: CDS-ISIS list
> Subject: [Isis-users] Migration previous version of ABCD to new ABCD
> version
>
> Queridos colegas,
>
> Existe um documento nos sites (
> http://modelo.bvsalud.org/download/abcd/manuais/) ou (
> http://isisabcd.pbworks.com/w/browse/#view=ViewAllObjects) com
> explica??es de como posso migrar uma base de dados criada em uma vers?o
> anterior do ABCD Windows para uma nova vers?o do ABCD corretamente?
>
> Obrigada
> Monica.
>
> Dear colleagues,
>
> There is a document on the sites (
> http://modelo.bvsalud.org/download/abcd/manuais/) or (
> http://isisabcd.pbworks.com/w/browse/ # view = ViewAllObjects) with
> explanations of how can I migrate a database created in an previous version
> of ABCD for Windows to a new ABCD version correctly?
>
> Thanks
> Monica.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.iccisis.org/pipermail/isis-users/attachments/20131017/26a31653/attachment-0001.html>
------------------------------
Message: 5
Date: Thu, 17 Oct 2013 09:47:45 -0700 (PDT)
From: daniel biset <dbiset at yahoo.com<mailto:dbiset at yahoo.com>>
To: CDS/ISIS-Lista <isis-users at iccisis.org<mailto:isis-users at iccisis.org>>
Subject: [Isis-users] FST, subcampos repetibles - ABCD
Message-ID:
<1382028465.7294.YahooMailNeo at web120703.mail.ne1.yahoo.com<mailto:1382028465.7294.YahooMailNeo at web120703.mail.ne1.yahoo.com>>
Content-Type: text/plain; charset="iso-8859-1"
Disculpen si se me pas? algo por alto, pero en la FDT de la base MARC en ABCD no veo como tratar los subcampos repetibles. Por jemplo, en estos casos
Subcampo c
1000#$aBlack Foot,$cChief,$dd. 1877$c(Spirit)
?Subcampos a y b
260##$aParis :$bGauthier-Villars
;$aChicago :$bUniversity of Chicago Press,$c1955.
?Subcampo n
24010$aInstitutiones.$nLiber
2.$nCapitulum
?Subcampo z
650#0$aReal property$zMississippi$zTippah
County$vMaps.
?
La cuesti?n es indizar los t?rminos contenidos en cada subcampo repetible.
En http://isisabcd.pbworks.com/w/page/31446367/Utilizar%20un%20javascript%20para%20presentar%20un%20campo%20%20con%20subcampos%20repetibles se especifica como formatear subcampos repetibles, pero no me di? resultado para? FST.
Desde ya muchas gracias.
Daniel H. Biset
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.iccisis.org/pipermail/isis-users/attachments/20131017/bc8bcac3/attachment-0001.html>
------------------------------
Message: 6
Date: Thu, 17 Oct 2013 17:49:31 +0000
From: De Smet Egbert <egbert.desmet at uantwerpen.be<mailto:egbert.desmet at uantwerpen.be>>
To: Heriberto Raul Garcia Alfaro <halfa1702 at gmail.com<mailto:halfa1702 at gmail.com>>
Cc: "isis-users at iccisis.org<mailto:isis-users at iccisis.org>" <isis-users at iccisis.org<mailto:isis-users at iccisis.org>>
Subject: Re: [Isis-users] ABCD Linux
Message-ID:
<7A31013ECEFE9A47B6A502B4A259260B0156309E2C at xmail31.ad.ua.ac.be<mailto:7A31013ECEFE9A47B6A502B4A259260B0156309E2C at xmail31.ad.ua.ac.be>>
Content-Type: text/plain; charset="iso-8859-1"
Hola,
hay una interfaz 'cambios globales' en ABCD, pero no lo he probado despu?s que han sido mejoramientos en esta funci?n.
Le suggiero usar el utilitario 'mx' con un gizmo en la linea de comando :
1. abrir ventana linea de comando (terminal) y navigar a al carpeta de la b.d., por ejemplo /var/opt/ABCD/bases/mibase/data
2. copiar /opt/ABCD/www/cgi-bin/mx en la carpeta (o incluir la carpeta cgi-bin en su path para facilmente poder llamar al ejecutable 'mx')
3. crear una b.d. 'zigmo' desde el teclado :
mx seq=con create=migizmo
lo que le va a presentar un 'prompt' para entrar dos valores : el contenido del V1 y del V2, separado por un '|', entonces p.e. :
abcd|ABCD
..
(se puede crear m?s registros ahora con siempre los 2 valores 'desde' y 'hacia', para terminar hay que entrar 'x')
Despues de entrar 'x' ya tienes creado su bd gizmo con un o m?s registros con valores en v1 que se van a cambiar en valores en v2.
4. Usar la b.d. gizmo para hacer los cambios en el campo v123, primeramente para la prueba :
mx mibase gizmo=migizmo,123
y se van a mostrar sus registros con los valores definido en v1 cambiado por los valores en v2
5. Usar la b.d. gizmo para hacer los cambios en toda la b.d., por ejemplo en todos los campos (sin menci?n del campo despues del nombre de la b.d. gizmo) :
mx mibase gizmo=migizmo create=mibase2 now -all
y en la nueva b.d. mibase2 tienes sus registros con los valores cambiados. Se puece renombrar su mibase2 a mibase.
Por supuesto tambi?n se pueden usar los parametros 'from=' y 'to=' o 'count=' para delimitar la operaci?n en ciertos registros.
Eso es mucho m?s r?pido y fuerte que la misma operaci?n por una interfaz WWW como ABCD, especialmente si hay diversos cambios que tienes que aplicar.
Bu?n ?xito...
Egbert de Smet
Universiteit Antwerpen
________________________________________
From: Heriberto Raul Garcia Alfaro [halfa1702 at gmail.com<mailto:halfa1702 at gmail.com>]
Sent: Thursday, October 17, 2013 7:00 PM
To: De Smet Egbert
Subject: Re: [Isis-users] ABCD Linux
Gracias sin embargo me presenta un problema el link (no abre bien), sin embargo tengo otra pregunta:
Como hago para realizar un cambio en un registro de manera global.
Po ejemplo si quiero cambiar todos los registros de un autor y estandarizar el apellido porque talvez esta mal escrito, cuales serian los pasos para hacer eso?
2013/10/17 De Smet Egbert <egbert.desmet at uantwerpen.be<mailto:egbert.desmet at uantwerpen.be><mailto:egbert.desmet at uantwerpen.be<mailto:egbert.desmet at uantwerpen.be>>>
The procedure to create and migrate a database from Micro CDS/ISIS or WinISIS to ABCD is available in the manual 'ABC of ABCD'. The chapter involved for the new version of the manual is available as a draft at the website 'http://abcd.netcat.be/files' at the lower part.
In essence it means that the existing FDT, FST and PFT can be 'copied' from exisiting databases and the ISO-export of your records can be imported into ABCD. In reality since ABCD is - as you said - 'web isis', many typical DOS or WINDOWS features of the PFT cannot be used and need to be replaced by WWW-equivalents, for which ABCD offers a nice wizard to create such PFT's.
For the FST you would best re-work the FST to use prefixes of 3 characters : 2 + '_' .
Egbert de Smet
Universiteit Antwerpen
________________________________________
From: Heriberto Raul Garcia Alfaro [halfa1702 at gmail.com<mailto:halfa1702 at gmail.com><mailto:halfa1702 at gmail.com<mailto:halfa1702 at gmail.com>>]
Sent: Thursday, October 17, 2013 4:47 PM
To: De Smet Egbert
Subject: Re: [Isis-users] ABCD Linux
Disculpen quisiera saber si decasualidad tienen algun documento o una referencia o que talvez me explicaran como migrar las bases de datos de micro isis a web isis, cual es el prosedimiento???
De antemano muhcas gracias
--
Heriberto Garcia Alfaro
Ing. Sistemas / responsable de ISIS IHNCA Nicaragua
UCA.
--
Heriberto Garcia Alfaro
Ing. Sistemas
UCA.
------------------------------
Message: 7
Date: Thu, 17 Oct 2013 15:33:28 -0400
From: Leandro Tabares Martin <ltmartin at uci.cu<mailto:ltmartin at uci.cu>>
To: isis-users <isis-users at iccisis.org<mailto:isis-users at iccisis.org>>
Subject: [Isis-users] Sobre ABCD / About ABCD
Message-ID: <52603B88.5050308 at uci.cu<mailto:52603B88.5050308 at uci.cu>>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hola a todos:
Estamos analizando detalladamente el ABCD y hay una serie de
funcionalidades de las cuales desconocemos su prop?sito, estar?amos muy
agradecidos si alguien nos pudiese explicar. Las funcionalidades son:
1- En la Entrada de Datos/Utiler?as la funcionalidad de "Desbloquear
Base de Datos".
2- En la Entrada de Datos/Utiler?as la funcionalidad de "Desbloquear
Registros".
Saludos,
Leandro
==============================================================================
Hi everyone,
We are making a detailed examination about ABCD and there are some
functionalities that we don't konw their purpose, we will be very glad
if someone can explain that to us. The functionalities are:
1- At Data entry / Utilities the functionality of "Unlock Database".
2- At Data entry / Utilities the functionality of "Unlock Records".
Regards,
Leandro
________________________________________________________________________________________________
III Escuela Internacional de Invierno en la UCI del 17 al 28 de febrero del 2014. Ver www.uci.cu<http://www.uci.cu>
------------------------------
Message: 8
Date: Thu, 17 Oct 2013 17:40:15 -0400
From: Didier Su?rez R <didier.suarez at reduc.edu.cu<mailto:didier.suarez at reduc.edu.cu>>
To: isis-users at iccisis.org<mailto:isis-users at iccisis.org>
Subject: [Isis-users] Ayuda
Message-ID: <5260593F.6010405 at reduc.edu.cu<mailto:5260593F.6010405 at reduc.edu.cu>>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hola lista:
En mi centro he instalado abcd 2.0 para linux pero estoy presentando los
siguientes problemas:
1. no tengo acceso en el m?dulo central. Esto lo soluciono configurando
config.php, as? puedo acceder pero entonces no me muestra la lista de
usuario.
2. no me permite crear nuevas BD.
Nota: Las carpetas tienen asignados los permisos 777
/var/opt/ABCD/bases/acces/data
en espera de su ayuda
Lic. Didier E. Su?rez Rodr?guez
Administrador de Red CGINFO
Centro de Gesti?n de Informaci?n
Universidad de Camaguey
Cuba
------------------------------
_______________________________________________
isis-users mailing list
isis-users at iccisis.org<mailto:isis-users at iccisis.org>
To manage your own subscription options go to: http://lists.iccisis.org/listinfo/isis-users
Or contact Henk Rutten: hlrutten at xs4all.nl<mailto:hlrutten at xs4all.nl>
End of isis-users Digest, Vol 36, Issue 11
******************************************
--
Dr Pawan Kumar Gupta
Jaipur INDIA
+919530141533
More information about the isis-users
mailing list